Your search returned 465 items.
To be able to create a plot from values that are saved inside a vector object (VisVec) you first need to define and fill a result file (ElmRes) with values from a vector of interest. The easiest way…
Tags
In order to plot values of a variable that was used in a DPL or Python script you first need to save the variable's values into a result file (ElmRes). For this define a result parameter on the…
Tags
The Thevenin and Norton equivalents are characterized by their open-circuit voltage and short circuit current. The inner voltage source of the Thevenin equivalent equals the open circuit voltage,…
Tags
An example is attached, where the Voltage source is controlled via a DSL block. Three different possibilities are included in the example. Import the project in PowerFactory and run an EMT Simulation.…
Tags
In order to run PowerFactory, a Licence Service that is called CodeMeter needs be installed on a Windows based machine (refer to this link for supported Operating Systems). For Single-User Editions of…
Copying the entire operational data from one scenario to another can be done very easily by activating the target scenario then using right-click, Apply on the source scenario. This copying process…
Tags
Yes, it is possible. For this task, you will have to define a new relay. This relay will represent the connection between the relays of interest. In the attached project, you will find two…
Tags
The objective of the attached project is to simulate and analyse the transient recovery voltage (TRV) on high voltage circuit breakers. The circuit breaker itself is modelled by means of a breaker…
Several EMT studies (transformer energisation, load rejection, ferro-resonance etc.) require a detailed model of the non-linear behaviour of the transformer iron core which is defined by its…
Tags
Depending on the available input data and the kind of study (e.g. steady state, RMS or EMT) different line models (Types) are required and available in PowerFactory. The following models are available…