Your search returned 126 items.
The ferroresonance phenomena is a non-linear series resonance that may result in transient currents of high amplitude and high harmonic content. For medium voltage networks the following system…
Using element parameter via signals is not possible in DSL but the configuration script, available since V2020, can help you to get the task done. The configuration script is defined in the type…
A synchronous motor is typically started as an induction machine while a field winding resistance is also used. The "asynchronous" motor starting of a synchronous machine implies the use of rotor…
This example provides an introduction to the analysis of arc furnaces and their influence to the supplying power system. The analysis covers the identification of the injected harmonic currents, the…
Refer to attached project. The model makes use of the AC/DC Connector element in order to link in EMT simulations the AC and DC sides of a network. The detailed model is built using power electronics…
Tags
Refer to attached project. The model makes use of the AC/DC Connector element in order to link in EMT simulations the AC and DC sides of a network. The detailed model is built using power electronics…
Tags
Refer to attached project. The model makes use of the AC/DC Connector element in order to link in EMT simulations the AC and DC sides of a network. The detailed model is built using power electronics…
Tags
In dynamic simulations, a breaker/switch can be opened via the Switch Event (EvtSwitch). The Switch Event can be parameterised in order to configure the opening process. Furthermore, the breaker…
In dynamic simulations, a breaker/switch can be closed via the Switch Event (EvtSwitch). The Switch Event can be parameterised in order to configure the closing process. Furthermore, the breaker…
This white paper documents the implementation of a detailed EMT model of a three terminal HVDC system using 2-Level Voltage Source Converters (VSC) in PowerFactory, and compares the simulation results…
Tags